网站地图 | 标签云 您好!欢迎访问山东宏钜精密光亮钢管制造有限公司网站!
全国服务热线:
139 6958 0678

江苏冷拔无缝管内外光亮钢管-「无缝钢管」

日期:2022/4/24 16:52:47 | 信息来源:http://www.httzgg.com

江苏冷拔无缝管内外光亮钢管-「无缝钢管」

冷拔精密无缝钢管 Cold drawn precision seamless Steel Tube

钢管内外壁无氧化层,承受高压无泄漏,尺寸高精度,外表面高光洁度,冷弯不变形,扩口压扁无裂缝,成品经以无氧介质热处理,以德国(欧盟)DIN 2391/EN10305-1为生产标准,经过精密独特的冷拔/冷轧工艺制成尺寸精度高,光洁度较好的精密无缝钢管,进过无氧介质热处理后内外表面均无氧化皮(膜)生成,保持了原有钢管尺寸精度与光洁度,有改善了钢管内外在性能,可适合各类深加工,用于各类车辆制造业的输油、输气(刹车制动)流体输送系统,包括客车,轿车,火车机车,各类工程机械(挖掘机,推土机,高空作业特殊车辆,清扫车,混凝土泵本等),适宜于与各类卡套接头连接,其效果优于普通钢管,可替代同标准的进口无缝管。

Concentricity and straightness

Strong wear resistance, High concentricity and Good straightness
We can control Straightness within 0.5/1000 which makes tubes easy for processing, machining and improve the processing efficiency and quality of finished products.

 

具体性能表现在
尺寸公差:每一道都通过精密拉拔, 严格控制成品和半成品内外径壁厚公差。

外径公差可控制在+/-0.03

外径公差可控制在+/-0.05

也可按客户特殊要求生产

Tolerance
Each drawing process is controlled strictly to minimum the tube inner and outer diameter Tolerance
OD tolerance can be controlled +/-0.03
ID tolerance can controlled +/-0.05

Other special requirements of tolerance can also be adopted

表面 (粗糙度)

通过称心拉拔技术和油拉技术,可以使内外表面光滑无毛刺。无氧退火进一步使光洁度高如镜面状态。 成品表面粗糙度在0.2um以内, 内外壁无任何氧化皮屑,此钢管运用在气动,液压,油路方面不会出现任何堵塞现象。可以保证气,液流动正常。

Surface roughness
Tube is drawn by mandrel and oil of each process so that the outer and inner surface is very smooth without any burr. Normalizing process makes the surface more shinning like mirror. Surface roughness can be controlled within Ra 0.2. No oxidized residual substances enable the hydraulic fluid and pneumatic gas go through the tube fluently.

 

同心度直线度高

钢管的耐磨性强,同心度,直线度能控制比较好。直线度能控制在0.5/1000, 这样可以减少客户使用过程中深加工,磨车削工序的工作量,提高成品合格率和工作效率。

性能:可承受高压, 各角度冷弯,抗拉, 扩口,压扁不爆裂,无裂纹。钢管的延伸和强度较好,可满足客户直接进行不同需求的后道加工处理。

用途: 液压系统,汽车用, 其他高清洁度,机械性能要求高的部件

交货状态:

NBK(+N)
GBK(+A)
BK(+C)
BKW(+LC)
BKS(+SR)
表面处理:除光亮退火外,也可镀锌处理。 锌层厚度8um以上, 银白色镀锌, 黄色镀锌,橄榄绿镀锌.。

 Mechanical Properties

The tube can be bent at any figure and bear the impact of high pressure, cold bending, flaring and flattening without any crack and breaks. The tube is with good elongation and tensile strength so different machining process can be arranged without special treatment.

Usage: Automotive industry, hydraulic system and other machine parts for high standard surface and mechanical properties.

Delivery condition:
NBK(+N)
GBK(+A)
BK(+C)
BKW(+LC)
BKS(+SR)

Surface Coating:
Color: Silver, yellow or olive green
Thickness: above 8um as per customer needs
Salty spray test hours: 48hours to 200hours as per customer needs.

本文标签: 江苏冷拔无缝管内外光亮钢管无缝钢管

联系方式 Contact information

山东宏钜精密光亮钢管制造有限公司

总机: 0635-8887969 139 6958 0678

Email:616223113@qq.com

地址:山东省聊城市辽河路东首

网址:www.httzgg.com

电 话:0635-8887969 手 机:139 6958 0678(微信同号) 地址:山东省聊城市辽河路

版权所有:山东宏钜精密光亮钢管制造有限公司